View 59-14UTD_4128939.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Luminosity white Color LED
59-14 UTD/TR8
Features
Super luminosity white LED. Built in 4 LED chips. Wide viewing angle. Soldering methods: Reflow soldering. High performance. Package in 12mm tape on 7diameter reel. Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
The 59-14 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Amusement equipment. Information boards. Flashlight for digital camera of cellular phone. Lighting for small size device.
Device Selection Guide
Chip Lens Color Material InGaN Emitted Color White Yellow diffused
Everlight Electronics Co., Ltd. Device No. : DSE-594-001
http://www.everlight.com Prepared date: 03-Oct-2005
Rev.1
Page: 1 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-14 UTD/TR8
Package Outline Dimensions
0.3
(1) (2) (3) (4)
5.0
(5)
(6)
(7)
(8)
5.0 1.5
0.3
0.55 1.25 0.475 1.25 0.475
0.55
1.05
(1)
(2)
(3)
(4)
1.05
(5)
(6)
(7)
(8)
1.0
1.25
1.25
1.0
0.45
0.45
0.45
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-594-001
http://www.everlight.com Prepared date: 03-Oct-2005
Rev.1
Page: 2 of 10
Prepared by: Jeff Tsai
0.75
3.5
0.75
EVERLIGHT ELECTRONICS CO.,LTD.
59-14 UTD/TR8
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current (Duty 1/10 @ 400ms) Soldering Temperature Symbol VR IF Topr Tstg ESD Pd IFP Rating 5 30 -40 ~ +85 -40 ~ +90 1000 110 100 Unit V mA V mW
mA
Reflow Soldering : 260 for 10 sec. Tsol Hand Soldering : 350 for 3 sec.
* The value are base d on the 1-die performance.
Electro-Optical Characteristics (Ta=25)
Parameter Symbol Min. 5.0 Luminous Intensity*1 Iv 10.0 Viewing Angle*1
Forward Voltage*2
Typ. 8.5 25.0 60 3.3 4.4 -----
Max. 15.0
Unit
Condition IF=20mA*2
cd 45.0 ----3.7 V 3.6 5.2 50 A deg
IFP=100mA*2 (Duty 1/10 @ 400ms) IF=20mA*2 IF=20mA*2 IFP=100mA*2 (Duty 1/10 @ 400ms) VR=5V*2
21/2
----2.7
VF
Forward Voltage*2 Reverse Current*2
IR
-----
*1 When 4 LED dies are operated simultaneously. *2 For each die.
Note: The products are sensitive to static electricity and care must be fully taken when handling products.
Everlight Electronics Co., Ltd. Device No. : DSE-594-001
http://www.everlight.com Prepared date: 03-Oct-2005
Rev.1
Page: 3 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-14 UTD/TR8
Color Ranks
x y 0.280 0.248 Rank A0 0.264 0.283 0.267 0.305 0.296 0.276 x y 0.287 0.295 Rank B3 0.283 0.304 0.305 0.330 0.307 0.315
Rank B4 x y 0.307 0.315 0.304 0.330 0.330 0.360 0.330 0.339 x y 0.296 0.276
Rank B5 0.287 0.295 0.307 0.315 0.311 0.294
x y
0.311 0.294
Rank B6 0.307 0.330 0.315 0.339
0.330 0.318
x y
0.330 0.318
Rank C0 0.330 0.361 0.360 0.385
0.356 0.351
*The C.I.E. 1931 chromaticity diagram ( Tolerance 0.01).
CIE Chromaticity Diagram
Everlight Electronics Co., Ltd. Device No. : DSE-594-001
http://www.everlight.com Prepared date: 03-Oct-2005
Rev.1
Page: 4 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-14 UTD/TR8
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. Device No. : DSE-594-001
http://www.everlight.com Prepared date: 03-Oct-2005
Rev.1
Page: 5 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-14 UTD/TR8
Label explanation
CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. : DSE-594-001
http://www.everlight.com Prepared date: 03-Oct-2005
Rev.1
Page: 6 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-14 UTD/TR8
Carrier Tape Dimensions: Taping Quantity: 800pcs
(4)
(3)
(2)
(1)
(8) (4)
(7) (3)
(6) (2)
(5) (1)
(8)
(7)
(6)
(5)
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No. : DSE-594-001
http://www.everlight.com Prepared date: 03-Oct-2005
Rev.1
Page: 7 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-14 UTD/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10%
No. 1
Items Reflow Soldering
Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.
0/1
4 5 6 7
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No. : DSE-594-001
http://www.everlight.com Prepared date: 03-Oct-2005
Rev.1
Page: 8 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-14 UTD/TR8
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No. : DSE-594-001
http://www.everlight.com Prepared date: 03-Oct-2005
Rev.1
Page: 9 of 10
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
59-14 UTD/TR8
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No. : DSE-594-001
http://www.everlight.com Prepared date: 03-Oct-2005
Rev.1
Page: 10 of 10
Prepared by: Jeff Tsai

▲Up To Search▲

Price & Availability of 59-14UTD

	To Download 59-14UTD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .